來源 http://yumax1012.blogspot.tw/2008/01/linux-wake-on-lan.html
可以試建立
/etc/init.d/halt.local
~~~內容如下
# script with local commands to be executed from init on system shutdown
#
# Here you should add things, that should happen directly before shuting
# down.
#
# enable WOL for magic packet (g) and broadcast (b)
#wol pumbagsd...
# Set Wake-on-LAN options. Not all devices support this. The
# argument to this option is a string of characters specifying
# which options to enable.
# p Wake on phy activity
# u Wake on unicast messages
# m Wake on multicast messages
# b Wake on broadcast messages
# a Wake on ARP
# g Wake on MagicPacket(tm)
# s Enable SecureOn(tm) password for MagicPacket(tm)
# d Disable (wake on nothing). This option clears all previous
# options.
/sbin/ifup eth0
/usr/sbin/ethtool -s eth0 wol g
#/usr/sbin/ethtool eth0
沒有ethtool 要先安裝 ethtool 套件：
apt-get install ethtool
執行 ethtool：
$ ethtool eth0
Settings for eth0:
Supports Wake-on: g
Wake-on: d
Link detected: yes
主要要看 Wake-on 這一項，要設成 g：
$ ethtool -s eth0 wol g
在執行一次 ethtool 確認有設定好：
$ ethtool eth0
Settings for eth0:
Supports Wake-on: g
Wake-on: g
Link detected: yes
由於這是在電腦開機前動作，
被喚醒的電腦只需要有 BIOS 及硬體有支援即可！
這樣就 ok 了。
可以試建立
/etc/init.d/halt.local
~~~內容如下
# script with local commands to be executed from init on system shutdown
#
# Here you should add things, that should happen directly before shuting
# down.
#
# enable WOL for magic packet (g) and broadcast (b)
#wol pumbagsd...
# Set Wake-on-LAN options. Not all devices support this. The
# argument to this option is a string of characters specifying
# which options to enable.
# p Wake on phy activity
# u Wake on unicast messages
# m Wake on multicast messages
# b Wake on broadcast messages
# a Wake on ARP
# g Wake on MagicPacket(tm)
# s Enable SecureOn(tm) password for MagicPacket(tm)
# d Disable (wake on nothing). This option clears all previous
# options.
/sbin/ifup eth0
/usr/sbin/ethtool -s eth0 wol g
#/usr/sbin/ethtool eth0
沒有ethtool 要先安裝 ethtool 套件：
apt-get install ethtool
執行 ethtool：
$ ethtool eth0
Settings for eth0:
Supports Wake-on: g
Wake-on: d
Link detected: yes
主要要看 Wake-on 這一項，要設成 g：
$ ethtool -s eth0 wol g
在執行一次 ethtool 確認有設定好：
$ ethtool eth0
Settings for eth0:
Supports Wake-on: g
Wake-on: g
Link detected: yes
由於這是在電腦開機前動作，
被喚醒的電腦只需要有 BIOS 及硬體有支援即可！
這樣就 ok 了。
2 則留言:
-
Jason Tseng 提到...
- 不好意思增加一些建議:
修改 : /etc/network/interfaces
iface eth0 inet dhcp
post-up /usr/sbin/ethtool -s $IFACE wol g
post-down /usr/sbin/ethtool -s $IFACE wol g
可每次開機自動設定好
http://wiki.debian.org/WakeOnLan -
小麥 提到...
- 謝謝您的建議!!
沒有留言:
張貼留言